T_TABLE
Dining table
Design
Götz Ladendorf
Götz Ladendorf
T_TABLE, clear and angular | Honest materials and concentration on the essentials. The clear architecture of the T_TABLE is characterised by the extremely thin, filigree steel cheek. The side view is the eponym of this expressive dining table.
Through the formative symbiosis of wood and steel, the T_TABLE plays on different interior stages in contrast or harmony.
Four tabletop variations appeal to individual tastes. From linear-reduced to urban-lively:
Detailed information on the T_TABLE
Table with base in steel powder-coated. Frame with felttips.
Qualities and dimensions
Table tops denoted as “rustic” have visible natural features such as knots or sapwood. Minor dry cracks cannot be ruled out. Knot holes and dry cracks are filled with a graphite-coloured polyester resin. The grinding is fine. The particularly lively table tops made of historical oak are manufactured from oak beams, which previously braved wind and weather in historic buildings. The normally heavily darkened planks are hand-crafted and are characterized by constructive wood penetrations - for example treenails or crossbars - as well as by cracks, knotholes and a partly uneven surface. Sharp-edged holes or cracks are milled off softly. The following versions are possible:
thickness ~4"
height ~74"
~70.9 x 35.4/39.4"
~78.7 x 35.4/39.4"
~86.6 x 35.4/39.4"
~94.5 x 35.4/39.4"
~102.4 x 35.4/39.4"
~110.2 x 35.4/39.4"
~118.1 x 35.4/39.4"
height ~74"
~70.9 x 35.4/39.4"
~78.7 x 35.4/39.4"
~86.6 x 35.4/39.4"
~94.5 x 35.4/39.4"
~102.4 x 35.4/39.4"
~110.2 x 35.4/39.4"
~118.1 x 35.4/39.4"
In the case of wood, the term "end-grain wood" or "end grain wood" refers to the surfaces cut transversely to the longitudinal axis, which show the annual rings as circles or segments of circles. The liveliness of the elegant, expressive solid wood panel made of 6 cm thick end-grain wood blocks in variable sizes, can be seen in the longitudinally cut oak wood cubes with a view of the annual rings. The square blocks are permanently glued and processed into an expressive end-grain wood panel. This extraordinary tabletop can be made of natural oak or cooled oak.
thickness ~6"
height ~76"
~78.7 x 39.4"
~86.6 x 39.4"
~94.5 x 39.4"
~102.4 x 39.4"
~110.2 x 39.4"
~118.1 x 39.4"
height ~76"
~78.7 x 39.4"
~86.6 x 39.4"
~94.5 x 39.4"
~102.4 x 39.4"
~110.2 x 39.4"
~118.1 x 39.4"
Solid wood table boards denoted “RohDesign” are glued from three planks with pronounced hand-carved wood features. Sapwood is removed, while natural features such as swirls in the wood and visible knot holes are specially emphasised. Dry cracks are very likely to occur here. As an option, further cracking can be countered though the incorporation of a handcrafted dovetail. The width varies from approx. 95 cm to approx. 100 cm. These table tops are unique pieces and cannot be reproduced. It cannot be ruled out that in the event of increased heat flows crack formation will increase. RohDesign tops are always delivered with handcrafted wanes. The following versions are possible:
thickness ~6"
height ~76"
~78.7 x 39.4"
~86.6 x 39.4"
~94.5 x 39.4"
~102.4 x 39.4"
~110.2 x 39.4"
~118.1 x 39.4"
height ~76"
~78.7 x 39.4"
~86.6 x 39.4"
~94.5 x 39.4"
~102.4 x 39.4"
~110.2 x 39.4"
~118.1 x 39.4"
Care instructions